Nobody likes car trouble, especially when it comes to tuning. Raise the hood and you will quickly see that this is no place for anyone but an expert. However, after years of working on tuning, I found that today’s engines rarely need tuning.
The problem they have is one that you can correct; I will show you how.
What usually happens is a sticky, tar-like film of oil and carbon that disrupts fuel supply, deters combustion, makes lubrication difficult, and clogs hydraulic lifters and valves. All of those conditions combine to reduce or decrease power output, cause rough idling, knocking noises, poor fuel economy, and smelly exhaust problems.
When the engine computer tries to make adjustments, the results are confusing as the computer cannot make allowances for such problems. Then the problem may get worse.
Proper cleaning of these dirty systems is required using special cleaning and friction-modifying chemistry.
After cleaning and reducing friction, free movement and function will return to each internal part, and this will restore proper breathing, increase vacuum, increase combustion, and allow the computer to re-tune the engine on the fly, i.e. , while driving. , to the best configuration ever. Does this make sense to you?
Here’s how to get professional fuel injector service and the ideal products to order and use.
One product that I use successfully to clean fuel injectors, eliminate rough idle, power loss, end valve tap, a common cause of all of the above problems, is called Mega Power Worn Engine Treatment.
Its simplicity of use and instant results prove it to be a great invention. it will help restore engine performance and get the job done right.
If you can add oil to the engine, you can.
Basically, it divides engine cleaning into two sections. There is a cleaning of the upper part, using 3 different cleaners. 1- Add a gasoline tank cleaner to the fuel tank. 2- Add a valve cleaner to the oil. 3- Add a combustion cleaner in a vacuum line such as the PVC valve. This cleans the top of the engine. I WILL GUIDE YOU THROUGH THE PROCEDURE and facilitate cleaning of fuel injectors and other engine systems to obtain satisfactory results.
This is followed by a lower side or oil side cleaning, using 3 more products. One in the dirty oil that is replaced during the oil change and two added to the new oil. Hundreds of car owners, not just mechanics, have used this method to solve their engine problems, saving hundreds of dollars.
For more information, why not take a look at the exact steps and products to use by visiting …? Http://www.auto-tune-up-and-repair-options.com/Car-tune-up.html
